There are several support options available for the Levato System. Detailed below is an explanation of each option, allowing you to make an informed decision about which option is right for your project.
Should you have any questions relating to support options or wish to discuss the practicalities in greater depth, please contact our technical department.
Please Note *
We recommend that the Levato Mono paving is installed with a slight fall (1%-1.25%) to ensure the paving slabs themselves drain. Porcelain is almost completely non porous therefore if installed dead level, after rain there will remain a 2-3mm bubble of water on the paver surface – a slight fall will ensure the majority of this water runs off.